Safety is in your hands

Uploaded 15 Jun @ 13:53pm

Over the past decade or so, there has been a significant change in the way tools have been made to meet the needs and requirements of the user. This has led to a large amount of investment in R&D by tool manufacturers to design and develop durable products that can deliver an efficient overall process and a high-quality finish on a variety of surfaces, while protecting users against the dangers of Hand Arm Vibration Syndrome (HAVS) and dust particles.
HAVS, which affects the blood vessels, nerves, muscles, and joints of the hand, wrist and arm, is becoming a major issue for workers as it is a condition they cannot see or are maybe unaware of that is affecting them until it is too late. The reason for this is basically that each worker may have different tolerances for the amount of vibrations they can handle or they may not realise there’s a problem until they try a different tool or do not use their own one for a while.
For Mirka, the fight against HAVS starts with putting the emphasis back on the user and this has been achieved with the introduction of the myMirka app (applicable in the Bluetooth enabled tools within the Mirka product range). The app provides the end user with the vibration levels from the tool on a colour graded scale, and advises on how to lower the vibration if required. Additionally, the speed the tool is being used at can be visualised in a real-time graph. Furthermore, if more detail is required, there is an in-app purchase that tracks the daily vibration levels in relation to European standards for a comparable scale of the pressures being put through their joints on a daily basis, which will allow the business to see how the tools are being used and potentially assist in the implementation of measures to protect the workers. The App is available to download through Google App and Apple App store.
Extraction systems may seem like they take up a lot of space but dust particles can be a major health issue for employees and could possibly lead to respiratory problems. This is why more and more businesses or single users are investing in systems to allow them to work in a dust-free work environment.
Laboratory tests have shown that without dust extraction, dust in the air per kilogram of sanded material is over 200 grams per kilogram, and dust on surrounding surfaces is almost 800 grams per kilogram. These may not seem like large quantities but when they accumulate over a long period, they could potentially turn into both a fire and health hazard for the business.
However, investment in a suitable mobile extraction system is not a short-term injection of the business’ cash, it should be viewed as a long-term commitment, so that it can provide an effective solution for a cleaner work space, a reduction in prepping and tidying up at the end of the day, and the potential dust contamination of other tools and surfaces. The smaller systems are more often used in workspaces because they are equipped with a local air supply and extraction, and are easy to move and store.

Top tips…
to achieving a dust-free environment and protect yourself from HAVS:
1. An increase in vibration can cause damage to the tool, so be aware that any variation in the weight of pad other than when using P180 paper discs can cause the machine to vibrate more.
2. Always use a genuine Mirka backing pad on Mirka tools, as it has been specifically designed for certain machines (a DEROS / PROS 150mm backing pad is engineered to weigh exactly 130gms). However, if you use a generic non Mirka pad it may alter the vibration of the tool and, in turn, cause damage to the bearing and other aspects of the tool. Mirka tools returned with non Mirka pads fitted are not covered by the Mirka warranty.
3. If you intend to use an interface pad (5mm / 10mm), you should remove the backing pad and insert the grub screw that comes in the box with the tool into the remaining threaded hole beneath the pad. This will counter balance the weight of the interface pad and reduce the vibration of the tool when in use.
4. The grub screw should also be used if coarse or heavy weight discs (P40 / 60 etc) are on the sander.
5. Using a pad saver will protect the backing pad from wear. However, if used when sanding plaster it often reduces the efficiency of the dust extraction. If P80 to P120 discs are used with a pad saver, we recommend the insertion of the grub screw.
6. Ensure that the product is regularly serviced for optimum performance.
7. Make sure the fleece bag in the mobile extraction unit is not full and does not have any rips or holes. If it does, replace it.
8. Periodically remove and clean the motor filter. This can be done by placing it in a bag and gently knocking the dust out of the filter. Or better still, use another vacuum or extractor to clean the filter. Once it is clean, replace the filter in the machine.
9. Make sure the seal between the tank and upper section of the extractor is clean and not damaged.

Further reading: www.mirka.co.uk

 

Reaching a combined audience of 39,200 decision makers/influencers, across the entire lightweight materials supply chain and into the large OEMs, through both printed and digital copies.

Our latest edition...

Sign up to receive our newsletter.

View our Media Pack!

Contact Us

M&MT Online
Editorial: Simon Simmons
Email: news@mmt-online.co.uk

Sales: Phil Sloan
Email: sales@mmt-online.co.uk
Phone: 07989 552530

Production: Denise Simmons
Email: production@mmt-online.co.uk

Testimonials

There is so much noise in the market that it is refreshing to find a magazine that cuts straight to the core of what’s important.

Ben Hayes – Sales Manager, CWST

M&MT Magazine is a well-rounded publication that delivers content on all the materials and manufacturing topics and industries. It touches a vast audience so we know that our content will be able to reach the right people.

Harriet Barnes - Marketing Communications Co-ordinator, Instron

About Us

Materials & Manufacturing Technologies covers the range of lightweight materials and the techniques available when manufacturing lighter and stronger parts.

By targeting the materials tier supply chain and the top end users M&MT will provide solutions to key professionals across the ‘lightweighting’ sector in all leading industries such as Aerospace, Automotive and so on.

Read more...